Tactics of gilt head bream fish

Prepare your abilities for capturing this hard-fighting itinerant species of gilt head bream fish, which may grow to double-figure weights if not handled properly.

It is a hard-fighting fish with a crown of gold on its forehead, and it has gained cult-like reputation among experienced sea fishermen because of its beautiful silver sides and gold crown on its forehead.

However, because to rising temperatures, their previously well defined range is gradually expanding farther north and east, making them more accessible to anglers all throughout the United Kingdom, particularly in the South West.

Readers also find interest in some other species like Blonde Ray, Bull Huss etc

Location of gilt head bream fish

Gilt head bream fish are traditionally found in the estuaries and surf beaches of Devon and Cornwall, but as previously stated, they have been moving further east along the South Coast of the United Kingdom in recent years, with giltheads being caught as far north as Kent and even from the coast of Suffolk in recent years.

Despite the fact that gilt head bream fish are infrequently recorded, there is little doubt that they frequent the estuaries of south-west Wales, and they have also been taken in the Menai Strait in north Wales. The south and south-west shores of Ireland are likely the best known for gilthead, with the Wexford region and County Cork serving as hotspots for the fish.

Seasona of Gilt-Head Bream Fish

The arrival of the gilt head bream fish into UK waters begins in the springtime, and although they may be found in the shallows of beaches, particularly early in the season, your greatest chance of capturing one of these monsters is up rivers and creeks.

Putting in the hours and experiencing the blanks is a part of the learning curve for any species fishing; nonetheless, this brief article is intended to increase your chances of turning your aspirations into a reality by providing some tips and tricks. It is common for gilt head bream fish to arrive in April and to remain with us until approximately September, or even longer in warmer autumns.

Areas of gilt head bream fish

  • Surf Beaches

Gilt head bream fish may be caught from open surf beaches, although it is best to look for them in tiny bays and coves rather than larger ones. Look for particular spots where there is some source of fresh water, such as a little stream that runs parallel to the coast or a beach that is near to a small estuary, where you may collect freshwater.

Start by casting near areas of rocks or stones, as well as cliffs at the extremities of beaches, to see if you can catch anything. The gilt head bream fish will also run the surf in a similar fashion to the bass, albeit they will likely to be a bit farther out from the shore.

  • Small Estuaries

Small estuaries provide the best habitat for gilt head bream fish, which arrive with the first flood tide and work their way through the main channels before filtering out into the side creeks as the tide height rises. Gilt head Bream Fish pay particular attention to the banks where mud and weed growth are evident, and they feed in large numbers. Identify and target regions where there are deeper pools in the main channel, as well as spots where the channel changes direction.

Look for fish near an apparent landmark, like as rocks or weed beds, to increase your chances of catching them. Mooring chains for boats may also serve as effective holding zones. Giltheads are itinerant in all of their forms. Gilt head bream fish appear in a location for a limited period of time before moving on. As a consequence, while fishing, particularly in estuaries, you may see small bursts of activity as the fish flush through the system, followed by a period of inactivity.

Right time for gilt head bream fish

In order to find the migratory fish, anglers pursuing gilt head bream fish should remain mobile and go farther up the estuary or further down the shore when bites stop. When fishing in the estuaries, smaller neap tides might be beneficial since the Gilt head Bream Fish can remain in front of you for a longer period of time.

On larger tides, gilt head bream fish flow through more quickly and are more widely dispersed, reaching all the way up to the mouths of estuaries and onto shallow mudflats. Gilt head bream fish are more likely to be captured in broad daylight, although gloomy, overcast days are the ideal days to catch them. As there is a ripple in the water caused by the wind, the shoals become less nervous when they pass through shallow water.


Tackle for gilt head bream fish

Gilt head bream fish are capable of pushing into double digits in weight, but most are just 5lb or so. They are also very agile fighters. On the surf beaches, 11-12ft bass rods throwing little more than 3oz, as well as modest 6500-sized multipliers, proving to be the most effective. Fill your reel with 15lb line, or 20lb if you’re fishing near to snags, and a 30lb shock leader for more protection. If you’re going to use a fixed spool, go with a 5000 size with 20lb braid line and a 30lb leader, and use the bass rod to cast it.

When fishing in estuaries, the bass rod is a popular choice as well, but experienced gilthead anglers often prefer a 10ft spinning rod rated 1-3oz, coupled with a tough 3500 to 4000 size fixed spool reel, such as the Penn Slammer series or similar, or even a fast-tapered mullet rod for maximum sport when fishing in close quarters in an estuary.

Rigs for gilt head bream fish

In the surf, a two-hook flapper rig with larger 18-inch hook lengths works well because it allows the bait to move, which is what these gilt head bream fish are looking for while they are feeding. You might also experiment with a single hook sliding leger, which would need a spherical ball weight and a hook length of 20 inches. This rig may be let to drift about in the estuary channels and proven to be more lethal than a two-hook rig that is anchored to the bottom.

Best rig material for gilt head bream fish

Due to the fact that fluorocarbon gilt head bream fish has teeth and can readily cut through ordinary mono, fluorocarbon is the ideal hook link material for 20lb fishing. Hooks do not have to be very large. Among the most popular are the size 2 Kamasan B940 Aberdeen, or something similar in a size 2 or 1.

Look for a size 1/0 Aberdeen if you want to catch larger crab baits and bigger fish. The longer shank of the Aberdeen pattern also aids in the battle against the bream’s teeth.

Perfect BAIT for gilt head bream fish

Blow lug is a top-tier bait that is difficult to beat from the surf beaches. Peeler crabs and fresh razorfish are fantastic choices if you’re fishing near to the shoreline. Using mussels is recommended, however they are not as effective as lug. Peeler or soft crabs are the most popular in the estuaries. Lugworms and bunches of harbour rag perform well in this environment as well.

To properly bait a hook, seek for filler material that will fit into the bend and shank of the hook, but leave the hook tip free to allow for simple penetration on a strike. Cutting a little square portion of squid, say around sequin size, and pushing it over the hook point and barb will prevent the worm or crab from slipping down and hiding the hook point, which is an excellent tip.

Nature of gilt head bream fish

In the surf community, it is often believed that the gilt head bream fish are usually near to the shore, however this is not always the true. If there is an evident feature that Gilt head Bream Fish can maneuver around, they may be at their maximum range even in extremely calm conditions. If necessary, be prepared to fish at distances of up to 100 yards if necessary.

Gilt head bream fish also like swimming through any deeper gutters that run parallel to the shore, as well as locations with little sandbanks and depressions, which they find appealing. It is also possible to find fantastic surfing on the rocks or cliff edges at the extremities of beaches. In estuaries, the Gilt head Bream Fish may be as close as a few yards away, so preserve your distance and avoid casting too often, as this will disperse the fish and prevent them from quartering the ground in front of you in search of food.

Bait positioning for gilt head bream fish

Make an effort to put baits near the foot of any stream banks where they meet the main channel, and cast into evident deeper pools, particularly if there is vegetation or a rock structure in them, since these are often the hot locations for fishing. gilt head bream fish move through certain paths, and the biggest catches are made by fishermen who are able to locate these tunnels and ambush the fish as they pass through them. Ignore shallow places since the fish seldom come to these areas to forage for food.

If you return to the entrance of the estuary and fish the main channel, you will be able to catch the fish again when the ebb tide begins to move through it. Alternatively, little eddies off the main channel and even small ports are good places to look for them since they will loiter there before departing the river.

Gilt head bream fish Recipes

  • Mediterranean Baked gilt head bream fish

Ingredients for the Oven Tray

  1. Orata, Dorada, Dorate etc. Gilt head  Bream Fish Scaled to the bone and intestines. If yours weighs more or less than mine, you may need to adjust the baking time.
  2. a single lemon
  3. peel and split five garlic cloves
  4. Rosemary fresh 2 sprigs
  5. 2 tbsp of Greek Seasoning Mix, either pre-made or homemade, is all that is needed.
  6. 2 tablespoons high-quality olive oil; there’s no need to go all out since it’s going to be baked anyway.
  7. a pinch of flaky sea salt per serving

Authentic Greek Fish Seasoning

  1. Oregano dried to 1 tsp
  2. 1 tsp of dried Marjoram
  3. Thyme powder
  4. 2 tbs dried parsley
  5. 1 tsp of Onion Powder.
  6. 2 tsp freshly cracked black pepper
  7. Grinded Fennel Seed, about a tablespoonful
  8. 1 tbsp Dill powder


  1. First, prepare the seasonings, which can be kept in the pantry. To prepare the seasoning, simply combine all of the ingredients in a bowl. You can use a coffee grinder to achieve an ultra-fine grind if your herbs aren’t already that fine.
  2. Pat your fish dry with a few paper towels after it has been scaled and gutted. This article’s body provides detailed cleaning instructions.)
  3. Set your oven to 220 degrees Celsius and get ready to bake.
  4. Using a cutting board or workstation, place your fish. Sprinkle 1 tablespoon of the seasoning mix into the fish’s cavity. Stuff it with rosemary, garlic, and lemon slices after you’ve sliced the lemon in half..
  5. Apply olive oil to both sides of the fish. Season the fish on both sides with the remaining tablespoon of seasoning. To bake the fish, cover a baking sheet with parchment paper and place it in the oven.
  6. Cut three diagonal slits on the fish’s side with a sharp knife. Half-slices of lemon should be inserted into the slits. The tail is edible, so put two half slices on top of it to keep it from burning!
  7. Remove from the oven and sprinkle with flaky sea salt.
  8. Bake the sea bream for 25 minutes at 350 degrees Fahrenheit. If your fish weighs more or less than mine, you may need to alter the cooking time (450 grams).
  9. Roasted potatoes and a wedge of lemon are a nice accompaniment.


This fish must be consumed right away. The person who microwaves leftover fish is despised by all.

Leave a comment